Skip to main content

哪个平台能在世界杯得到额外奖励,哪里可以下载忍者,buffalo blitz free credit,Electric Vehicle Powertrains

Accelerate the development of electric vehicle powertrains using Model-Based Design and real-time target hardware

Use Simulink® and Speedgoat hardware to design controls for electric powertrains and their charging infrastructure from electric powertrains and power management systems to DC fast chargers. Typically composed of electric motors, power converters, battery packs, and onboard chargers, electrified powertrains can be found in battery electric vehicles (BEV), hybrid electric vehicles (HEV), fuel cell electric vehicle (FCEV), busses, and scooters. Reference models in Powertrain Blockset™, Motor Control Blockset™, and Simscape Electrical™  allow you to get started seamlessly with desktop simulation. Subsequently, use the same models as real-time applications on target hardware for rapid control prototyping (RCP) and later for hardware-in-the-loop (HIL) testing.

Perform automated tuning and automated testing of controls and hardware components with Simulink Control Design™ and Simulink Test™ to ensure that functional, safety and certification requirements are met. Then interface with your hardware with a few clicks. For example, you can configure battery cell emulators, run bus simulations for restbus or direct bus interface using CAN, CAN FD, SENT, or FlexRay, and even configure I/O interfaces to either measure or emulate resolver and encoder sensors. In addition, speedgoat FPGA solutions can be used for RCP and HIL testing of converters with wide bandgap semiconductors (WBG) like Silicon Carbide (SiC) or Gallium Nitride (GaN), or to emulate nonlinear effects of electric motors based on finite-element method (FEM) look-up tables.

 

 

 

"I feel that Speedgoat has certainly developed a plug-and-play real-time platform for Simulink. For us, that translates into more time testing our control systems and less time developing a HIL bench."

Joaquin Reyes, Controls Engineer, Proterra

 

 

 

 

 

  • Include motor models with nonlinear saturation or spatial-harmonics from FEM tools from JMAG or ANSYS Maxwell.
  • Test power converter controllers with switching frequencies up to hundreds of kHz.
  • Add more FPGAs  and I/O modules to your real-time system in order to increase computational power and I/O connectivity as your application grows. The modules can be interlinked using an Aurora high bandwidth, low latency links.
  • Simulate state-of-the-art wide bandgap semiconductors on FPGAs and reach simulation time steps below one microsecond and a resolution of PWM switching signals as low as 4 nanoseconds. 
  • Leverage Speedgoat target computers for calibration and bypassing applications.

Website yang dapat cuci banyak dalam Mesra Antarabangsa,how to play alice in the wonderland,big sweep jackpot cash,Featured Application Use Cases

Electric Vehicle System Design

Leverage Model-Based Design to develop electric powertrains and their associated controllers, including energy management systems. For example, it is important to perform trade-off studies of your architecture and size key components such as the battery pack and traction motor. Later, you can perform HIL testing of your design at system-level to validate safety and performance for normal operation and fault conditions. Furthermore, you can reuse models from Vehicle Dynamics Blockset™, Powertrain Blockset™, Simscape™, and Simscape Electrical™ also for HIL testing. Finally, combine with the Unreal Engine® from Epic Games® to combine with 3D scenes.  

Frequently Used I/O Interfaces

Simulink Application Resources 

Electrified Powertrains Development

Develop and test electric powertrain architectures, including electric motors, power converters, energy storage, and mechanical transmissions to meet the system-level requirements. Get started with examples from Powertrain Blockset™, Simscape Driveline™, or Simscape Electrical™. Integrate different electric motors like permanent magnet synchronous motors (PMSM), induction motors, or switched reluctance machines. Design and test controllers that adjust to the battery charge and temperature levels. Perform HIL testing of fully electric and hybrid designs, and automate testing of drive cycles under normal and extreme driving conditions. 

Frequently Used I/O Interfaces

Simulink Application Resources 

Electric Motor Emulation and Control

Include electric motors and test controllers with rapid control prototyping. Also, test embedded motor controllers with HIL testing. You can even automatically calibrate and test motor control algorithms such as flux-based calibration to consider battery state-of-charge and voltage level. Or include high-fidelity FEM-based models and look-up tables to include spatial-harmonics and other nonlinear effects during HIL testing. Finally, use electric motor emulators from a few kilowatts to megawatts to test power converters with all electrical connections and fully powered. 

Frequently Used I/O Interfaces

Simulink Application Resources 

Power Converters Testing and Control

Develop and test power converters for high performance and comfortable driving experience, both DC-DC converters and motor inverters. Use rapid control prototyping to drive power converter controls for wide bandgap (WBG) semiconductors well above the human hearing range up to 1 MHz. Then use hardware-in-the-loop to thoroughly test embedded control units under normal and fault operating conditions. Finally, test the power converters and even motor inverters with all electrical connections and fully powered using high-voltage motor emulators.

Frequently Used I/O Interfaces

Simulink Application Resources 

Testing Power Management Systems

Develop battery management systems and control units for fuel cells using Simulink and Speedgoat hardware. Rapid control prototyping enables you to test controllers and estimation algorithms like state-of-charge (SoC) or state of health (SoH). HIL testing allows you to validate your embedded BMS or fuel cell controller. Use the battery cell simulator capable of emulating up to 320 individual cells in series to validate your complete BMS hardware under typical charge thoroughly and discharge conditions and under fault conditions. 

Frequently Used I/O Interfaces

Simulink Application Resources 

Developing Battery Chargers

img_use-case_teaser-with-screen_battery

Develop and test onboard battery chargers, high voltage DC chargers, and grid-to-vehicle (G2V) infrastructure using Simulink and Speedgoat hardware. Control and test power converters and include communication protocols like CAN, CAN FD, or SAE J1939 for high-voltage DC charging. Furthermore, use Simscape Electrical models for HIL testing of embedded charging platforms, including power grid emulation. 

Frequently Used I/O Interfaces

 

Simulink Application Resources 



See how it works, learn more about Rapid Control Prototyping and Hardware-in-the-Loop simulation,
to design control designs and test controller hardware.


 

Request a Configuration Proposal

Get a proposal for a real-time target
machine configured to your needs.
 

 Request a proposal
 
 
 

Request a Free Workflow Demo

Curious how to accelerate control design
innovation with a modular controller hardware setup?

Request a free demo
 
 
 

Have Questions?

Talk to our automotive experts
about your application requirements.
 

        Email us        
 
 
webmaps
lucky365 angpaulucky365 lebihbig gaming angpaubig gaming kreditplay tech angpauplay tech lebihasia gaming percumaasia gaming kreditsbobet angpausbobet kredit
maxbetjackpotangpaorebatefreecreditfeaturebonusprizegamingPlaySlotsStrategyPokerStarsFournierTripadvisorspadegamingrequiredBoardGameGeekplayboypegasusWinboxAdvertising33winbetsuncitybetmfabetCasumoBetDafabetnewtownAmateurpegasusrebatsuncitydreamgameAgentShareholderReviewCasinoEasyReaderpaybillnumberOnlineSlotsMoreOftenBestBetCasinoSportsDailySpinswithCasumojokerAgentsuncityAgentPartyCasinolivescoresPlatformOnlinevworldkworld